How do you replace an old basement window?

31 Jan How do you replace an old basement window?

Replacing an old window in a basement is a great way to increase the value of your home and improve its energy efficiency. Replacing an old window with a new one can be done by anyone, but there are some things you should know before you get started. This article is presented by Houseilove.com.

How do you replace an old basement window?

Replacing a basement window is not easy, but it can be done. If you’re planning to replace one of your basement windows, here are some tips for making sure the job goes smoothly:

Measure the height and width of the window

Measure the height and width of the window. The measurements should be precise to millimeters. Use a tape measure for this, or use your smartphone’s built-in measurement tool if you don’t have one handy. The replacement steel frame basement windows should be the same size as the existing window. If you’re replacing a metal or aluminum frame, measure from the inside of the opening and make sure that the new window will fit snugly and not stick out by more than 1/4 inch on either side.

Image source: google

Select your replacement window

When shopping for replacement windows, you’ll want to ensure that the new window has all the features you need. You’ll also want to choose a window that will look good in your basement and fit with the style of your home. Here’s what to look for:

Size: Choosing the right size is essential because it can affect how much light and air flow into your basement. If you choose too big of a window, there may not be enough room between it and the ceiling or walls, which could cause moisture buildup in this area. On the other hand, if you choose too small a window, there might not be enough space between it and other objects, such as cabinets or shelves. This could lead to drafts coming through when there is wind outside! Ensure all necessary measurements are taken before deciding which size would work best for your project.

Style: There are many styles of basement windows available today; some examples include casement windows (which open outward), sliding windows (which slide horizontally), double-hung windows (which both swing up/down vertically) …etcetera! The most important thing here is choosing one that complements purposeful functionalities and aesthetic appeal inside–what would look best where? To help answer this question, consider whether there will be any kind of view outside since some locations might only offer limited views. In contrast, others offer spectacular ones depending on whether they face north vs south etcetera.

Remove the old window

Once you’ve removed the window frame and sash, you can remove the window glass. You’ll need to remove all these pieces to get to the hinges.

Suppose your replacement windows are going in an old basement window opening. In that case, you’ll need to install a new sill or header beam above the opening before installing them (see our article on replacing an old basement window). This gives your new window support when its weight is transferred onto it from above. The height of this piece will depend on how high off of the floor level your current wall is; if it’s just above floor level, then a shorter piece will be fine. If not, you might want something longer, like a header beam, instead of just a sill.

After removing an old window from its frame, install new flashing around each side where plaster meets brick (if applicable), following instructions provided by manufacturers’ literature included with their product line specifications sheet(s). Ensure all joints are cleanly sealed so water cannot leak into them later through any nicks or gaps created during the installation process!

Prepare to install your window

Before you begin, make sure to prepare the area. Remove any debris from around the window opening and check that there are no obstructions in your path. Then, arrange your tools and materials where they will be easy to access:

The right tool for this job is a crowbar or pry bar. You’ll need it to remove old caulking and sealant at the edges of your window frame before installing new weather stripping on each side of your new basement window. The best weather stripping comes from an adhesive strip that sticks directly onto plastic or vinyl windows without additional adhesive materials. Ensure you have safety goggles handy if working with glass and gloves for handling caulk remover or other chemicals involved in this process!

Install the new window

Once the window is in place, use a level to ensure it is straight. Then caulk around it to seal it into place. If you need to replace more than one window, consider using a framing kit with all the parts necessary for installation and will save you time and effort (and possibly money).

Finally, inspect your work for any water leakage around the window. If you see any problems, correct them before moving on to your next project so that they don’t cause damage later on or make future repairs harder than they need to be.

Conclusion

Replacing your old basement windows is a simple and effective way to improve your home. The process can be done by anyone willing to invest some time into it, so don’t let the job intimidate you! We hope this guide has given you all the information needed to make an informed decision on what type of window replacement makes sense for your situation.